Complete text and all illustrations for the monograph [2e] by Dr Jan Pajak,
"The Oscillatory Chamber, Arkway to the Stars" (1994, ISBN 0-9583380-0-0)
Chapter L:
[2e] Figure L1 (a): Detached configuration of two UFOs. (a) The external appearence of such configuration.
[2e] Figure L1 (b): A vertical cross-section through such a UFO.
[2e] Figure L1 (c): A whole photo showing the detached configuration.
[2e] Figure L1 (d): Enlargement of the vehicle - it clearly shows the "black bars" running between side propulsors.
[2e] Figure L1 (e): The same configuration a while later.
[2e] Figure L2 (a): "Black bars" in a spool-shaped UFO.
[2e] Figure L2 (b): A reconstruction of the witness of a spool-shaped UFO type K3, Brazil, 1969.
[2e] Figure L3: A UFO's twin-chamber capsule scorched in grass, exactly as shown in Figure F5 - outer chamber flux domination.
[2e] Figure L4: A drawing of the day-time twin chamber capsule visible in an ascending UFO, exactly as shown in Figure F5 - outer chamber flux domination.
[2e] Figure L5 (left): Colour photograph of a UFO capsule during daylight (inner flux prevailence).
[2e] Figure L5 (right): Night photograph of a UFO capsule (outer flux prevailence).
[2e] Figure L6 (left): Oscillatory Chambers seens on UFO decks. (left) The predicted appearence of such a chamber.
[2e] Figure L6 (right): Observed appearence of a real Oscillatory Chamber from deck of a UFO.
[2e] Figure L7: An ancient plan for an Oscillatory Chamber?.
Chapter M:
[2e] Figure M1: A four-propulsor UFO which abducted the late Jan Wolski.
[2e] Figure M2 (a): A night apearence of a four-propulsor UFO. (a) Witnesse's original sketch of this UFO.
[2e] Figure M2 (b): My (Dr Jan Pajak) reconstruction of this UFO.
[2e] Figure M3: A photograph of four-propulsor UFO.
Chapter N:
[2e] Figure N1: UFOnauts and their vehicle drawn by S. Maslowski (9 years old). Notice that because of the large size of this illustration, at Web sites "*.50megs.com" it is shown at the cost of its quality. Therefore, in a full quality this illustration can be seen on Web sites at "*.20m.com" servers, e.g. at ufonauts.20m.com.
[2e] Figure N1 (framed): A drawing of Magnocraft type K3 in the same position as that UFO.
[2e] Figure N2: A UFOnaut with a glowing belt.
[2e] Figure N3: One flash picture of a UFOnaut by Jeff Greenhaw.
[2e] Figure N4: A UFOnaut calling himself "Ausso".
[2e] Figure N5: A UFOnaut climbing a wall like an insect (it means that a magnetic propulsion was used).
[2e] Figure N6: One of several footprint of an UFOnaut left on PVC floor.
Chapter O:
[2e] Figure K4: UFOs of the 2nd generation with telekinetic propulsors.
Dr Jan Pajak: Photograph of the author of this monograph [2e] "The Oscillatory Chamber, Arkway to the Stars", taken at the Hass Pass, New Zealand, around 1985 (i.e. in at the time when this monograph [2e] started to eventuate).
Complete DESCRIPTIONS under illustrations for the monograph [2e] "The Oscillatory Chamber, Arkway to the Stars" (in ZIP from WORD "*.DOC" format).
LIST of illustrations and filenames for the monograph [2e] "The Oscillatory Chamber, Arkway to the Stars" (in ZIP from WORD "*.DOC" format).
Instructions:
Part G: How to
replicate
this web page in your own computer:
For some readers that work
on problems addressed on this web page, it would be highly
beneficial to have a replica of this web page together with
all the illustrations, texts, links, etc., in their own
computer. After all, in case of having such a replica, one
can later view this web page, or print it, directly from
his/her own computer, not from the Internet. Thus one becomes
independent from the access to Internet in each situation
when he/she wishes to have a good look at this web page or
at illustrations that this page displays. Waiting for
opening a web page is then also incomparably shorter
than waiting for opening an Internet page. It is then
also not needed to put up with all these subtle obstructions
which seem to plague my web pages almost as it these are
purposely sabotaged by "little green UFOnauts" of some sort.
So for these readers, who wish to make a "source replica"
of this web page in their own computer, below I am describing
step-by-step how to accomplish this. This description reveals
thoroughloy how to prepare the so-called "source replica" of
the web page, means a replica prepared in the programming
language called "HTML" in which this web page was originally
coded. Note that such a "source replica" is much better than
an "image replica" that almost every browser allows to make
in quite a simple way. For example it allows to gradually
complete all missing components of a given web page (e.g.
missing illustrations or text files) from other servers.
It alows to update separately each selected component of
the web page as soon as we meet in Internet their better
versions. It also allows us to learn principles of web
page programming, thus it can be for us a first step towards
later making our own web pages. Here is the instruction
of producing such a "source replica":
#0. Ready-made source replica?
(without advertising banners). One brief information before in items
#1 to #8 below I explain the exact procedure of preparing for yourself
a source replica of this web page. Namely, under some addresses listed
in "Menu 3", such a source replica of this web page, together with
all folders, source codes of web pages, samples of texts and illustration,
etc., but without advertising banners, already awaits in the ZIP format,
ready for downloading to your own computer. So all what you need to
do in order to download it to your own computer, is to click in
"Menu 1" on the menu item marked
"Source replica of this page".
So try to click, because this source replica may be available here
(i.e. at this address) and it would be handy to have it in your
own computer. In turn, when such a ZIPped source replica downloads
to your computer, all what you need to do is UNZIP it onto your
hard disk. After UNZIPing, it forms a separate folder in which
you will find a folder named "a_pajak" with all source files,
subfolders and samples of text and illustration inside, ready for
the running, testing, displaying, and checking how all these work
on your own computer. All what you later need to do in your spare
time is to download to text folders remaining volumes of monograph
[1/4], while to folder 14 download the remaining illustrations,
which could not be included to the ready-made source replica
because of their volume. (Note that in case you already have on your
hard disk a folder named "c:\a_pajak" with
my other source web pages, it is enough if you transfer all files and
subfolders from this new folder "a_pajak" to the already existing one
named "c:\a_pajak".) After this brief information, let us now return
to this procedure of making (all by yourself) a source replica of this
web page. Here it is:
#1. Create a folder
named "a_pajak" (or "archives_pajak") on your hard disk "c:".
This folder is to hold this web page (and possibly also any
other my web pages). To create such a folder, run a utility
program named "Windows Explorer" or "My Computer", choose
"Local Disk (C:)" for the "Address" in this utility program,
then click on "File" in the pull-down menu from this "Windows
Explorer", then click "New", finally choose the command "folder".
Type the name "a_pajak" to the new folder that you created
on you hard disk. Later you are to use this folder "a_pajak"
for storing all my web pages, monographs, and illustrations
that you wish to keep in you own computer.
#2. Create sub-folders
inside of this main folder named "a_pajak". These sub-folders are
to contain subsequent kinds of texts and illustrations displayed
or accessed through this web page. Here is the list of sub-folders
that are used by this web page:
14 - it contains all the illustrations which are used by
monograph [1e] (and thus also this web page), and also are used
in monograph [1/4].
54 - it contains all the illustrations which are used by
monograph [1e] (and thus also this web page), and also are used
in monograph [5/4].
1e - it contains all illustrations unique to monograph [1e].
flags - it contains images of flags (i.e. German, Spanish,
French, Italian, Polish, and English) used in my web pages. These
images of flags are contained in files named de-flag.gif, es-flag.gif,
fr-flag.gif, it-flag.gif, pl-flag.gif, uk-flag.gif. Any flags
scanned into "*.gif" files with the above names, can be used for
this purpose.
2e - it contains the source text of monograph [2e] in English,
plus all illustrations unique to this monograph [2e].
In order to create such sub-folders, again it is enough to shift
the "Windows Explorer" inside of the folder "a_pajak" and then
generate them one by one.
#3. Save the source code of this web page
in your folder "a_pajak". For this, "right click" on your mouse while pointing
it any text area of this web page (e.g. pointing right here). A small menu
should appear, which is to have the option "View Source". Click on this menu
option, and the source code of complete this web page appears in your text
editor named "Notepad". Click on the "File" pull-down menu from this "Notepad"
and choose the option "Save As...". Save the source code from your "Notepad"
using the name "figs_2e_3.htm" for the "File name" of this code, while for
the "Save in" pointing at the folder "c:\a_pajak" that you created earlier.
Notice that pages called via links from this page, should be saved
under slightly different names, namely:
"figs_2e_1.htm" for the page with illustrations (1),
"figs_2e_2.htm" for the page with illustrations (2),
"figs_2e_3.htm" for the page with illustrations (3).
In order to save the text of (scrollable) "Menu 4", you need to firstly
display it on the screen, by clicking on it from either "Menu 1" or "Menu 2",
and only then you can save the source code of it under the name "menu.htm"
in a manner identical as you save the source code of this web page.
Also all pages called from this page via links in "Menu 1" or "Menu 2", should
be saved almost identically as you save this web page, only that you use
slightly different names assigned to them, e.g names: "oscillatory_chamber.htm"
for the web page on the "Oscillatory Chamber", "magnocraft.htm" for the web
page on "Magnocraft", "tekst_1_4.htm" for the Polish version of this web
page, etc.
#4. Save illustrations. Right click
separately on each illustration from this web page, then choose the option
"Save Picture As". The majority of illustrations you need to save in the
subfolder "14". Remaining in subfolders [54] and [1e]. Notice that each
illustration indicates at the bottom of the screen the subfolder in which
it is to be saved.
#5. Run this web page in your computer.
After you save this web page, you can run it in your own computer whenever
you wish, by simple pointing at the file "figs_2e_3.htm" (i.e. the one with
the source code of this web page) using the "Windows Explorer" for this pointing,
and then double clicking at this file. (You can also run this file by pointing
the "Windows Explorer" at it, and then pressing "Enter".) Pages linked with this
one via hyperlinks can also be displayed through clicking on these hyperlinks
while viewing this page, or can be displayed through clicking via the "Windows
Explorer" at their names, means e.g. at "figs_2e.htm", "figs_2e_1.htm",
"figs_2e_2.htm", "figs_2e_3.htm", "oscillatory_chamber.htm", "magnocraft.htm",
"pajak_jan_uk.htm", etc.
#6. (Optionally) remove banners. Free
servers on which for the understandable reasons I display all my web sites,
usually insert codes of banners to the source code of web pages that are
displayed on them (frequently codes of these banners contain various irritating
errors which try to make viewing my web pages quite difficult). If these banners
irritate you, you can optionally cut them out from
the source code of this web page, after you save this code in your own computer.
To cut the banners out you need to identify their code (either by addresses
referred in this code and starting from "http://...", or by seeking the
comment type "banner insertion ..." which appears at the beginning and
at the end of the banners' code).
#7. (Optionally) update your replica of this
web page. If someone is especially interested in descriptions contained on this
web page, then it would be desirable to check in Internet every let say couple of
months, whether description from this web page are updated and improved. If so, then
it is worth to replace the old version of this web page with this improved version.
For this, it is enough to rename the old replica kept in your computer by adding
the word "old_" in front of it, and then copy from the internet a new version
to store it under the original name that it has.
#8. In case of any doubt regarding the making
of such a replica of this web page, it is worth to see a separate web page that is
entirely devoted to the explaination of the replication procedure of my internet
pages in your own computer. This additional web page is run from
"Menu 2",
where it is listed under the name
Replicate".
Links to illustrations:
|